How To Fix Samsung TV Remote Is Not Working?

Samsung TV Remote Is Not Working

The best technique to repair a broken Samsung TV remote is to identify the source of the problem. For example, you may notice that when you press a button, it does not respond. The remote may also fail to pair with the tv, or the sensor may be working. Troubleshooting or fixing the problem will be challenging until you know what is causing it.

Technically, four factors can cause a Samsung TV remote to cease working correctly. These include faulty batteries, an electronic issue with the gadget, a faulty remote, and a faulty sensor on the TV. The first thing you should check to diagnose the problem is the battery. Begin by replacing the batteries, cleaning the remote’s upper edges, and checking the terminals. If the problem persists, try one of these fixes.

While attempting these troubleshooting steps, you can use the Samsung SmartThings app on your phone or a compatible keyboard and mouse to manage your TV.

Methods for responding to a Samsung TV that does not fix the remote

If your Samsung TV is not responding to the remote, try the following troubleshooting steps:

1. Restart your tv

Restarting your tv will refresh the system and allow you to begin again.

  • Turn off the tv.
  • Could you remove it from the power supply?
  • Wait approximately 30 seconds.
  • Reconnect the TV to the power supply.

Try turning it on with the remote to see what happens.

2. Carry out a digital camera test

A digital camera test will help you evaluate whether the infrared on the remote is working correctly.

  • Switch on your phone’s camera.
  • Aim the remote at the camera’s lens.
  • On the remote, press a button.
  • To signify that the remote is working, the remote’s Infrared eye should glow on the camera screen.
ALSO READ:  Fix BCM20702A0 Driver Error on Windows 10 / 11

If the remote works, the problem is with the remote sensor on the TV. However, if it does not operate, the remote is faulty. Think about replacing it.

How to fix a Non-Working Samsung Tv Remote Sensor

Troubleshoot for any obstructions between the remote and the sensor on your TV when checking the remote sensor. The infrared signal will be blocked if an object is between the two. You should also restart your TV and try again. Follow the instructions above.

If you’ve tried all these instructions and the sensor still doesn’t function, return the TV to the seller if it’s still under warranty. If not, locate a reputable specialist who specializes in Samsung televisions.

Troubleshooting a Samsung Smart TV Remote Touchpad

The touchpad on the Samsung Smart Touch Remote can lose sensitivity at times. The problem may arise due to constant variations in the calibration level. A better solution is to re-calibrate the Smart Touch Remote.

  • Hold down the NUMBER key for three seconds.
  • The calibration process will commence.
  • The remote’s LED will flicker twice after calibration.

Avoid touching the touchpad during the calibration process. If the problem persists, you may need to calibrate the touchpad regularly.

However, if the remote fails to work ultimately, it is best to get a suitable replacement remote that is compatible with your TV. Alternatively, you can use the Omaic universal remote for all Samsung TVs.

How to fix a Samsung remote that is not pairing

You can fix a remote that is not pairing by resetting it. Here’s how you should go about it:

  • Take the batteries out. Consider using new ones, if possible.
  • While the batteries are out, hold the power button for at least 20 seconds.
  • Release the power button.
  • Reinsert the batteries.
  • Hold the Play/Pause and back buttons to initiate the re-link process.
ALSO READ:  How to Chromecast Zwift to TV Step By Step

Once done:

  • Point the remote to the sensor on the TV.
  • Press and hold the Return to Play/Pause buttons simultaneously for at least three seconds.

Your Samsung TV will start syncing with the remote. You will see a message indicating you have connected the remote to your TV.

What if your remote is blinking red light?

When your Samsung TV remote is not working and starts blinking red, you can try to fix it in several ways:

  • First, restart the TV as outlined in step one above.
  • Pair the remote again, as shown in step four above.

If the above does not work, reset the remote. Start by removing the batteries from the compartment. Press the Power button for eight seconds. Then, reinsert the batteries and try using the remote.


When your Samsung TV remote is not working, you can troubleshoot or fix the problem in several ways. Start by replacing the batteries, cleaning the upper edges of the remote, and checking the terminals.

Alternatively, consider pairing the remote again if you experience issues with the red light flashing. Also, you can fix a touchpad that is not functioning by calibrating the device from time to time.


How To Fix Vertical Lines On A TV Screen

How To Fix Disney Plus Downloads Not Working?