Android TV Remote Not Working: An Android TV is a terrific investment if you watch many videos online on streaming services like Netflix and Prime Video. Most streaming apps are available immediately on the TV, allowing you to watch your favorite shows and movies on a large screen. While the UI on most Android TVs remains consistent following the recent Google TV upgrade, the remotes might vary considerably.
Every manufacturer includes its control with an Android TV. As a result, if your remote ceases to function, you will be unable to manage any feature of your Android TV.
The 7 Best Solutions to Fix Android TV Remote Not Working
If this is a trouble for you, here are some solutions to the Android TV remote not working issue.
1. RETURN TO THE TV
The problem may be with your Android TV like Android TV remote not working rather than the remote. Restarting your television is the easiest way to confirm this. However, because the remote isn’t working, you can’t continue the TV with it.
Instead, unplug the TV from the power outlet and wait a few minutes before connecting it back in. Then, wait for your TV to reset before using the remote if Android TV remote not working .
2. INSPECT AND REPLACE THE REMOTE’S BATTERIES
TV remotes are powered by alkaline cells or batteries. Therefore, if the battery’s charge is depleted, the remote will no longer function properly or Android TV remote not working. So first, remove the batteries by sliding the cover off the remote’s battery compartment. Then, replace them with fresh ones and test the remote to see whether it works.
While at it, ensure the remote has the proper batteries. Most critically, the polarities correspond to those specified on the remote. If you use rechargeable batteries, ensure they’re fully charged before placing them into the remote.
3. PAIR THE REMOTE AGAIN WITH A BUTTON COMBINATION.
The majority of Android TV remotes communicate with your TV via Bluetooth. Unlike a regular Infrared (IR) remote, you must pair it with the TV. If the remote becomes unpaired, it will no longer work with the TV or Android TV remote not working until it is repaired. To pair the remote, different remotes and TVs need different button combinations.
To determine the correct button combination to connect the remote, consult the user manual that came with your TV. On some TVs, it can be the home and back buttons or simply holding down the home button for a few seconds. A fast Google search should assist if you didn’t locate the information you’re looking for in the user manual.
4. GET CLOSE TO THE TV
As previously stated, many new Android TV remotes link to your television using Bluetooth. So, for the remote to work, it must be within the Bluetooth range of the TV. If the TV remote does not function like Android TV remote not working properly from a distance, So get closer to the television and try again. Also, ensure there aren’t any obstacles between the TV and the remote.
Concrete walls and pillars between the remote and the television can reduce Bluetooth range. It is also true for regular infrared remotes. Because IR requires the transmitter and receiver to be in the same line of sight, you must stand in front of the TV and point the remote directly at it to function.
5. VERIFY THAT THEIR EMITTER IS WORKING UNDER A CAMERA.
If your Android TV has a typical IR remote, there is an easy way to see if the IR emitter is working correctly. This stage will necessitate the use of your smartphone. It is what you must do.
Step 1: Launch your smartphone’s camera app.
Step 2: Aim the camera at the remote’s IR transmitter. It is usually found near the top of the remote.
Step 3: Press any button on the remote, and you should see a light blink in your smartphone’s camera viewfinder.
If you see a light blink, the remote is working well, and the problem could be with something else. If you don’t notice any glowing LEDs, it could mean a problem with your remote’s hardware.
6. PAIR THE REMOTE AGAIN WITH AN ALTERNATE INPUT DEVICE.
Because your TV remote cannot be used as an input device, you can use an external input device, such as a mouse, to control the various elements on your TV. After connecting the mouse, you may repair your remote with the TV via the settings menu. Here’s how to go about it to fix Android TV remote not working issues.
Step 1: Plug a mouse or keyboard into one of the USB ports on your Android TV.
Step 2: In the top-right corner, click the Settings icon.
Step 3: Next, click on the Remotes & Accessories tab.
Step 4: Select Remote Control.
Step 5: Choose Include a remote control.
Now, follow the on-screen instructions to repair your remote with the TV.
7. APPLY THE GOOGLE TV APP AS A REMOTE CONTROL
If all else fails above to resolve problem of Android TV remote not working , your last option is to utilize the Google TV app as a TV control. It’s a good thing Google provides this option within the Google TV app because if your actual remote breaks or you misplace it, you can always utilize this option as a backup. It is how it works.
Step 1: On your smartphone, launch the Google TV app.
Step 2: Select the TV remote option in the app’s bottom right corner.
Step 3: When prompted, hit Allow to allow the app permission.
Step 4: Choose the Android TV you want to manage.
Step 5: A code will now appear on your TV screen. Enter it into the phone and press the Pair button.
Your smartphone will connect to your television. With the Android TV, you can now use your phone as a remote.
EASILY CONTROL YOUR ANDROID TV
It must be inconvenient if Android TV remote not working because you cannot operate any TV feature without it. You can, however, utilize these techniques to repair your remote and get it working again. You may also use your smartphone as a remote for your Android TV. If you have a Fire TV stick rather than an Android TV, here’s how to fix the Fire TV stick remote not functioning problem.